Portable Electronic Proximity Switch , Inductive Proximity Sensor
Square Shape
Details
Two-wire
NPN/PNP
Normally open
AC
About maintenance and overhaul
In order to keep the proximity sensor to work stably for longtime,
the following regular examinations should be performed just like
general control
1. Check the installation position of detected object and proximity
sensor if any deviation,loosening or deformation exists.
2. Check the attached wires and connecting parts if any
loosening,bad contact or wire breaking off exists.
3. Check if there is any metallic powder accumulation or not.
4. Check if the temperature condition and surrounding environment
condition are normal or not.
Parameter
| Lag distance | Less than 10% of the detection distance |
| Detecting objects | Magnetic metal (detection distance is reduced when non-magnetic
metal) |
| voltage | DC : DC 12~24 (6~36V) pulse (p-p) below 10% |
| AC : AC 110~220V (36~250V) 50/60Hz |
| Current consumption | N.P : ≤13mA |
| D : ≤0.8mA |
| A : ≤1.7mA |
| Control output | N.P : ≤300mA |
| D : ≤200mA |
| A : ≤400mA |
| Loop protection | N.P.D : reverse connection protection, surge absorption, load short
circuit protection |
| A : surge absorption |
| Ambient temperature | -30~+65°C (no icing, no condensation) |
| Ambient humidity | -35~95%RH |
| Insulation resistance | 50MΩ or more (DC500 megohmmeter) (between charging part and
housing) |
| Withstand voltage | AC 1000V 50/60HZ 1min (between charging part and Housing) |
| Temperature effect | -30~+65°C: detection distance error ±15% at +23°C |
| -25~+60°C: detection distance error ±10% at +23°C |
| Voltage effect | 6-36V (90-250V) : ±15% of detection distance error |
| 10-30V (220V) : ±10% of detection distance error |
| Protection level | IP67 (IEC) |
| Material | Housing: ABS |
| Detection surface: ABS |
Note:Please read the "Precautions" of the product manual before
use.
Company Introduction
Zhongde adheres to the "service for survival, innovation and
development" business philosophy and "people-oriented" development
strategy, with a good working environment and career development
platform to condense talent, and strive to create innovative
development-oriented enterprises, while establishing a common The
core team of the goal, efficient and orderly operation process,
energy-saving, environmentally safe and reliable electrical
products, serving the power automation industrial control business.
